KP100 mask is dust mask, mainly suitable for filtering oily and non-oily particulate matter.It can be used in non-ferrous metal processing, food processing, construction and other polluting industries.

Classification of masks:

Dust respirators are divided into KN and KP according to performance. KN is only suitable for filtering non-oily particles, while KP is suitable for filtering oily particles.

Protection grade:

KN series:

KN100: The filtration efficiency of non-oily particles above 0.075 microns is greater than 99.97%

KN95: The filtration efficiency of non-oily particles above 0.075 microns is greater than 95%

KN90: The filtration efficiency of non-oily particles above 0.075 microns is greater than 90%

KP series:

KP100: Filtration efficiency of oil particles above 0.185 micron is greater than 99.97%

KP95: Filtration efficiency is greater than 95% for oily particulate over 0.185 microns

KP90: Filtration efficiency of oil particles above 0.185 micron is more than 90%

Filter material requirements

1. Materials in direct contact with the face should be harmless to the skin;

2. The filter material is harmless to human body;

3. The materials used shall be of sufficient strength and shall not be damaged or deformed during their normal service life.

The design requirements:

1. It is not easy to cause structural damage. The design, composition and installation of components should not cause any danger to users;

2. The design of the headband should be adjustable so that it is easy to wear and take off. The mask should be firmly fixed on the face without obvious pressure or pain.The headband design of replaceable half face mask and full face mask should be replaceable;

3. It should have the smallest possible dead zone and a larger field of view;

4. When wearing the mask, the lens should not cause fog and other conditions affecting vision;

5. Respiratory protective equipment using replaceable filter element, breath valve, suction valve and headband shall adopt convenient replacement design and allow users to conveniently check air tightness of mask and face at any time

Apply to the environment:

It is mainly applicable to non-ferrous metal processing, metallurgy, iron and steel, coking, gas, organic chemical industry, food processing, construction, decoration, petrochemical industry, asphalt and other industries that produce oil and non-oil particle pollutants such as dust, smoke, fog and so on.